Payment & Shipping Terms:
|Payment Terms:||TT||Minimum Order Quantity:||1 Kit|
KS-370 paint rapid dispersion testing machine (quick hand)
Product model: KS-370
Brand Name: Modern Environment
Place of Origin: China
Related Standards: GB / T 5211.17, GB / T 9287, GB / T 21868.2, ISO 787-20, ISO 2814, ISO 8780-2
The paint rapid dispersion testing machine (commonly known as "quick hand") is used for laboratories such as paints, dyes, and inks to quickly and efficiently oscillate and disperse materials, and can conduct comparative dispersion tests of multiple materials at the same time. KS-370 type paint rapid dispersion testing machine has two types of column type and floor type, and has two configurations of clamping tank configuration and clamping bottle configuration, providing customers with a variety of choices.
Tags: shock dispersion testing machine
1. Overview and safety precautions:
The paint rapid dispersion testing machine (commonly known as "quick hand") is used for laboratories such as paints, dyes, and inks to quickly and efficiently oscillate and disperse materials, and can conduct comparative dispersion tests of multiple materials at the same time.
KS-370 type paint rapid dispersion testing machine has two types of column type and floor type, and has two configurations of clamping tank configuration and clamping bottle configuration, providing customers with a variety of choices. The column type is more convenient to pick and place materials, and the floor type is more stable. Clamping tank configuration can hold various user-supplied material tanks (no more than 2.5L on each side, a total of 5L on both sides), bottle clamping configuration with small glass bottle clamps (4 on each side, a total of 8 on both sides) ). The supplied small glass bottles each have a volume of approximately 195mL.
The paint rapid dispersion testing machine is used in the testing process of chemical products, and users should establish appropriate safety and sanitary protection measures and determine rules and regulations in accordance with relevant safety regulations before use. Safety issues related to contact with chemical raw materials should be established by the user, and are not within the scope of this manual.
2. Main technical parameters:
(Column Clamp Bottle)
(Floor Clamp Tank)
(Floor Clamp Bottle)
|Spindle Reciprocating Amplitude||16mm||16mm||16mm||16mm|
|Spindle Oscillation Angle||30deg||30deg||30deg||30deg|
|Power Supply||220V 50Hz||220V 50Hz||220V 50Hz||220V 50Hz|
3. Related Standards
|GB/T||5211.17 9287 21868.2|
|ISO||787-20 2814 8780-2|
4.1. Column installation
(1) Install the suction foot on the bottom plate of the column bracket;
(2) After the column is in place, use the expansion screws to fix the rubber stopper around the bottom of the column (see the figure below);
(3) Install the main unit on the column bracket.
4.2. Floor-mounted installation
Place the four foot springs in the spring seat holes on the bottom panel of the main unit to use.
5. Operation summary:
5.1. Put the materials to be dispersed and the grinding media (grinding beads) into the tank (or bottle). The material-bead mass ratio can refer to the following table.
|Grinding Media||Glass Bead||Steel Bead|
|The Ratio for Material to Bead-||1:2~3||1:3~4|
5.2. Put the closed material tank (or bottle) into the clamping device and turn it to grip. The clamping force should be appropriate to avoid damage to the can (or bottle) due to excessive force or damage to the clamping device.
5.3. Try to avoid the use of single-side cans (or bottles). If you really need to use it on one side, hold the counterweight tank (or bottle) containing water on the other side.
5.4. If the small glass bottles are used in the configuration of the clamping tank, in order to improve the dispersion efficiency, the two small glass bottles can be clamped at a time at the symmetrical position of the single side clamping plate near the outside. Also pay attention to the balance on both sides of the clamping device.
5.5. Set the timer according to the required grinding time (randomly allocated, please refer to the timer manual), and start the machine.
5.6. After the dispersion is completed, please make sure that the machine is completely still before turning the shaker to loosen the clamping device and take out the tank (or bottle).
5.7. After the work is completed, please disconnect the power supply and do the cleaning and maintenance work in time.
5.8. For detailed steps and judgment standards of material operation, please consult relevant regulations of different products by yourself, which is not within the scope of this manual.
6, Four-hole gripper use method (only the bottle configuration is provided):
6.1. Loosen the ingot nuts at both ends and separate the four-hole holder up and down.
6.2. Place the small glass bottle in the lower holder (same as the specifications of the small glass bottle provided randomly).
6.3. Cover the upper holder and tighten the ingot nuts at both ends.
6.4. Install the entire gripper on the quick-hand gripper.
6.5. During installation, it must be noted that the two grooves on the four-hole gripper must be aligned with the cylindrical pins on the quick-hand gripper; the positioning block on the four-hole gripper must be above the quick-hand gripper.
7, Matters needing attention:
7.1. After using the new machine for 100 hours, please replace the crankcase lubricant. For daily use in the future, just check and add in time. Lubricating oil grade: Great Wall heat setting machine lubricant 4402-1.
7.2. The total mass of the holding material tank (or bottle) should not exceed 5 kg, so as not to shorten the service life of the machine.
7.3. Please do a good job of cleaning and maintaining the guide rod and screw of the gripper in time to avoid the difficulty of the advance and retreat of the grip caused by rust or residual foreign objects.
7.4. In order to prolong the service life of the machine, please stop the machine for 10 ~ 15 minutes every time after working for more than 90 minutes to allow the machine to cool down and then start again.
7.5. There will be a lot of heat when the machine is working. Please try to place the machine in a workplace with good ventilation.
7.6. The company will continuously improve and develop products according to the market and customer needs. Subject to change without notice.
8. Operation video:
9. Ordering Information:
|KS-370A||Paint Quick Dispersion Test Machine (Column Clamp Tank)|
|KS-370B||Paint Quick Dispersion Test Machine (Column Clamp Bottle)|
|KS-370C||Paint Quick Dispersion Test Machine (Floor Clamp Tank)|
|KS-370D||Paint Quick Dispersion Test Machine (Floor Clamp Bottle)|
Accessories: Quick-hand special glass bottle
Packaging & Shipping
10. Packing list:
|B) Accessories||Column Tank||Column Bottle||Floor Tank||Floor Bottle|
|Sealing Ring (2 small 1big)||1||1||1||1|
|Rubber Pads (for Pads clamping)||4||4||4||4|
|Rubber Suction Feet||8||8||No||No|
(with pads up and down)
|Small Glass Bottle||No||8||No||8|
11. After-sales service:
11.1. For product quality problems, if you raise an objection within 7 days after the product is sold and the product is not damaged, our company is responsible for unconditional free return;
11.2. The nationwide warranty for this product, warranty period: 1 year warranty;
11.3. If there is any product quality problem during the warranty period, free maintenance; provide long-term technical support outside the warranty period;
11.4. For all product after-sales issues, please contact our company directly, our after-sales service team will respond to the problem within 30 minutes.
Professional Machinery& Parts Wholesaler and Retailer,
ONE-STOP PURCHASE, SAVE YOUR TIME
Both MOQ 1 packing and OEM are Acceptable.
We are one of the leading professional company with more than 10 years experience in wholesale and retailing Mechanical Machinery & Parts , warehouse, and reliable service for minimum3 years quality guarantee:
WHY CHOOSE US?
1. Excellent Quality Tested in Advance:
We had surely tested all our product with accelerated experience as a customer before delivery to your hand.
2. 3-Year- Guarantee After-sale Service :
We guarantee on all our products with three years responsibility since delivery.
3. Fast Online Reply by Whatsapp:
For any of your new inquiry or using problems, we will give fast reply online by whatsapp.
4. MOQ 1 packing Acceptable:
Minimum 1 pcs/kit/carton is acceptable, the more quantity, the better price
5. ONE-STOP PURCHASE, SAVE YOUR TIME:
We are always ready to serve for your demand on new products.